SYSTEM PARTS BREAKDOWN
PARTS SPECIFICATIONS
TRACK CHANNEL
ONLY AVAILABLE IN 24' LENGTH
COLOR: WHITE / BRONZE
- Used on entire perimeter of opening.
- Fasten perimeter channel to Masonary W/ 1/4”x2-1/4” blue tap.
- All horizontal Edgeview track channel will typically have a notch, Cut on each side after length is determined to fit properly.
- Use drill template for cable fixed, and tensioner push locks to match intermediate post holes on track channel attached to walls.
INTERMEDIATE POST
42" LENGTH / PRE-DRILLED + NOTCHED
COLOR: WHITE / BRONZE
- All intermediate post for Cable application are pre-drilled and notched.
- Install grommets in all holes on both sides of intermediate post.
- All intermediate post for Picket application are pre-notched.
- Intermediate post are used either between two walls or full length post.
- All intermediate post are attached directly to floor with 3 hole clips.
- All intermediate post are attached to bottom of chair with 4 hole clips.
TOGGLE FIXED PUSH-LOCK
TOGGLE TENSIONER PUSH-LOCK
THERE WILL ALWAYS BE 12 PUSH-LOCKS ON EACH SIDE WITH A 42" CHAIR-RAIL HEIGHT
COLOR: CHROME
- ULTIMATE RATED LOAD: 1000 LBS.
- WORKING RATED LOAD: 750 LBS.
- MININUM 5/16" HOLE DIAMETER, MAXIMUM 11/32" HOLE DIAMETER.
- .75" MINIMUM OPENING CLEARANCE.
- MAXIMUM POST WALL THICKNESS: .200"
PICKET PANEL
PRE PUNCHED
COLOR: WHITE / BRONZE
- displayed as an assembly
- picket mounted to pre punched track with (4) #10x1.5" 304 ss screws
- Cut to fit between intermediate post
- When 1"x1" picket are attached to make picket panel, each panel is attached underneath chair rail, and on top of bottom track channel with (6) #10x1.5" 304ss screws
WITH THIS 3MODEL VIEWER YOU ARE ABLE TO NAVIGATE AND EXPLORE OUR PRODUCT.
WATCH A DIGITAL INSTALLATION VIDEO
FOR A BETTER EXPERIENCE
